SR_194 – Cuchulainn Workwear – MDC2504-606 /

Dati del cliente

Cuchulainn Workwear

Flurrybridge Enterprise Centre, Jonesborough, Ireland, BT35 8SQ

Alan Murphy

Telefono:

Occasione

Riparazione

Orari di lavoro

pg@modico.com

23/09/2026...

14.00 -

18.00

24/09/2026...

9.00 -

15.00

Totale AZ:

10 ore

Temp.: 23°C

Hum.: %

Modijet Wave

SN: MDC2504-606

Tipo di inchiostro: UV

Configurazione:

Inizio FW:

Fine FW:

Prossima manutenzione:
(secondo la targhetta di assistenza)

Svolgimento del lavoro

Lavori eseguiti:

After the crash, the customer installed a new printhead themselves, but without success.

During inspection, the following issues were found:

* The ink channels had been connected incorrectly.

* The flat cables were connected incorrectly and were contaminated.

* The connected dampers were damaged.

Work carried out:

* Removed the printhead again.

* Flushed all ink channels with flushing solution.

* Correctly connected four new flat cables.

* Reconnected the dampers.

* Replaced two damaged dampers: CW and KW.

* Performed a nozzle test – 100% OK.

* After the flat cables were connected correctly, the CARRIAGE error no longer occurred.

* Test print completed successfully.

Additional work:

* Additional operator training.

* Explanation of the spot color functions and settings.

* Machine setup/changeover.

* Software setup and instruction.

Fatto:

Selezione finale:

Lavoro completato

Name: Alan Murphy
(1) Hersteller/Modell: Modijet Wave – MDC2504-606
(2) Produttore/Modello: –
Grund des Einsatzes: Reparatur
Ausgeführte Arbeiten: After the crash, the customer installed a new printhead themselves, but without success.

During inspection, the following issues were found:

* The ink channels had been connected incorrectly.
* The flat cables were connected incorrectly and were contaminated.
* The connected dampers were damaged.

Work carried out:

* Removed the printhead again.
* Flushed all ink channels with flushing solution.
* Correctly connected four new flat cables.
* Reconnected the dampers.
* Replaced two damaged dampers: CW and KW.
* Performed a nozzle test – 100% OK.
* After the flat cables were connected correctly, the CARRIAGE error no longer occurred.
* Test print completed successfully.

Additional work:

* Additional operator training.
* Explanation of the spot color functions and settings.
* Machine setup/changeover.
* Software setup and instruction.

Lavoro completato
Note:

Secondo la bolla di consegna	Quantità	Numero di articolo	Designazione	Stato
	4		FLATCABLE HEAD WAVE	installato

File caricato:

(da definire) Visualizza il rapporto di assistenza (PDF)